CHAINTECH CT-6LTM, User Manual, Page: 21 / 50

Award BIOS Setup Program
17
Chapter 3
ROM PCI / ISA BIOS (2A69JC39)
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
INTEGRATED PERIPHERALS
SUPERVISOR PASSWORD
USER PASSWORD
IDE HDD AUTO DETECTION
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
STANDARD CMOS SETUP
BIOS FEATURES SETUP
SeePU & CHIPSET SETUP
POWER MANAGEMENT SETUP
PNP/PCI CONFIGURATION
LOAD SETUP DEFAULTS
: Select Item
(Shift) F2 : Change Color
ESC : Quit
F10 : Save & Exit Setup
Time, Date, Hard Disk Type...
Figure 3-1 Setup Program Initial Screen
3
Award BIOS Setup Program
Award's BIOS ROM has a built-in setup program that allows users to modify the basic
system configuration. This information is stored in CMOS RAM so that it can retain
the setup information, even when the power is turned off.
When you turn on or reboot the system, press the Delete key to enter the Award
BIOS setup program. The primary screen as shown in Figure 3-1 is a list of the menus
and functions available in the setup program. Select the desired item and press enter
to make changes. Operating commands are located at the bottom of this and all other
BIOS screens. When a field is highlighted, on-line help information is displayed on
the left bottom edge of the screen.
This mainboard's system BIOS includes SCSI BIOS for PCI SYMBIOS 810 based
SCSI cards. In the case that such a SCSI card is installed, the system BIOS
will auto-scan the ROM address and install BIOS in the first available address.
@