CHAINTECH CT-6LTM, User Manual, Page: 18 / 50

Chapter 2
14
Clear CMOS Data Jumper (JP5)
To clear the contents of the CMOS, please follow the
steps below.
1. Disconnect the system power supply from the power
source.
2. Set the JP5cap at location 2~3 for 5 seconds, then set
back to the default position.
3. Connect the system's power and then start the system.
4. Enter BIOS's CMOS Setup Utility and choose Load
Setup Defaults. Type Y and press enter.
5. Set the system configuration in the Standard CMOS
Setup menu.
Chassis Intrusion Monitoring Connector (JP3)
This board supports the chassis instruction monitoring
feature of the management extension hardware by means of
a mechanical or photo sensor switch attached to the
motherboard through this 1x3-pin chassis security header.
The mechanical switch is set to open for normal computer
operation.
Power-On By Keyboard Jumper (JP1)
This board supports a keyboard power on function defined
by the Power On By Keybord option in BIOS's Power
Management screen. Some out-of-date keyboards may
require larger current than supplied by the Suspend 5V
of modern power supplies. When using older keyboards
disable this function.
Normal (default)
1
1 Clear CMOS data
1
Disabled (default)
Enabled
1