CHAINTECH CT-6LTM, User Manual, Page: 13 / 50

Hardware Setup
9
4. If you have a Pentium II processor that exceeds 300MHz, use the User Define
option to set your CPU's parameters. Set the frequency ratio (also known as
external clock multiplier factor) and CPU bus frequency according to your processor's
specifications. See Figure 2-7.
Please note that this mainboard supports up to 300MHz Pentium II processors.
Processors with higher clock speeds were not released at the time this
mainboard was designed. If you are using a processor with 333MHz or above
clock speeds and you are experiencing problems, please contact your mainboard
provider for a BIOS update.
You do not need to make voltage settings because SeePU automatically
sets your CPU voltage.
5. Press Esc to return to the CMOS Setup Utility, press F10 to Save and Exit Setup
and choose 'Y' to confirm. The system will automatically reboot and during startup
you will see the correct CPU type indicated on the start-up screen screen.
Overclocking
Operating a CPU at a higher frequency than it's specification allows is called overclocking.
If the CPU frequency is set at a higher frequency than it's specification allows, it may
or may not run at that freqency, depending on the quality of your CPU and the extent
to which the frequency has been overset. The mainboard manufacturer highly
discourages overclocking as it may result in data loss, CPU burn-out, system failure,
etc.
Figure 2-7
ROM PCI / ISA BIOS (2A69JC39)
SeePU & CHIPSET SETUP
AWARD SOFTWARE, INC.
ESC: Quit
F1
: Help
F5 : Old Values
F7 : Load Setup Defaults
:Select Item
P U / P D / + / - : Modify
(Shift) F2
: Color
Auto Configuration : Enabled
DRAM Speed Selection : 60ns
MA Wait State : Slow
EDO RAS# To CAS# Delay : 3
EDO RAS# Precharge Time : 3
EDO DRAM Read Burst : x333
EDO DRAM Write Burst : x222
DRAM Data Integrity Mode : Non-ECC
CPU-To-PCI IDE Posting : Enabled
System BIOS Cacheable : Disabled
Video BIOS Cacheable : Disabled
Video RAM Cacheable : Disabled
8 Bit I/O Recovery Time : 1
16 Bit I/O Recovery Time : 1
Memory Hole At 15M-16M : Disabled
Passive Release : Enabled
Delayed Transaction : Disabled
AGP Aperture Size (MB) : 64
SDRAM RAS-to-CAS Delay : Slow
SDRAM RAS Precharge Time : Slow
SDRAM CAS Latency Time : 3
Power Failure Recovery : Disabled
Spectrum Spread : Disabled
Flash BIOS Protection : Disabled
Hardware Reset Protect : Disabled
***** CPU Setup *****
CPU Type : Pentium-II-233