Page. 36 of 63
3.7 INSTALLATION SETTING & FUNCTIONS
3.7.1
The personalisation Menu
The boiler can start & work without any setting.
The menu gives the installer the opportunity to personalise every installation (external storage, monozone,
multizone, solar …) as preferred.
3.7.2
Automatic air purge function
A special function to purge the residual air inside the primary circuit
after a filling cycle or an intervention on the heating circuit with the
following advantages:
Less noise inside of the heating system and radiators
Fast installation phase
No air inside the heating circuit
Good
condition
working
This function can be activated by the installer by pressing of “Esc”
key for 5 sec continues till to the finish (about 6’ ) or pressing of
“Esc” key) digits shows : P1
The aim is to help to purge the residual air inside
the primary circuit after a filling cycle. At the
activation the following cycle is begun and can
be repeated several times, till the boiler and the
heating system are completely purged from air.
End user
Installer
Technical
service
0
Language, days and time settings
• Timer
program
2 Boiler
parameters
3
Solar and storage
4
Zone 1 parameters : Heating
5
Zone 1 parameters : Heating
6
Test and utility
8
After sales service parameters
Chrono
functions
Installation
personalization
Parameter
check
Summary of Contents for TALIA
Page 1: ...Product Guide Release 01_16 05 07 TALIA ...
Page 23: ...Page 23 of 63 ...
