4
NORSE Operating Manual & Parts List 9681310 & 9681311
4
three wires of the extension cord should be of the proper
gauge.
•
Keep visitors at a safe distance from work area.
•
Keep children out of the workplace. Make your workshop
childproof. Use padlocks, master switches or remove switch
keys to prevent any unintentional use of your power tools.
Maintaining your tool
•
Always unplug the tool and remove it from its power source
prior to inspection. If your machine plugs into an electrical
outlet do not unplug the tool by pulling on the cord.
•
Consult this manual for specific maintenance and adjustment
procedures.
•
Keep the tool clean for safest operation. Metal or wood dust
build ups can become combustible.
•
Check for damaged parts. A part that is damaged should
be properly repaired or replaced. Do not perform makeshift
repairs. Use the parts list in this manual to order repair parts.
Repairs must be made by a qualified technician.
Know how to use your tool
Dusty work environments may be
hazardous to your health. Always wear a
OSHA/NIOSH approved, properly fitting face mask or
respirator.
The operation of any machine can result
in foreign objects being thrown into the
eyes, which can result in severe eye damage. Always wear
safety goggles complying with United States ANSI Z87.1.
(shown on package) before commencing power tool
operation.
Think safety! Safety is a combination of
operator common sense and alertness at
all times when tool is being used.
•
Know your tool. Learn the tool’s operation, application and
specific limitations.
•
Keep your hands away from moving parts and sanding
surfaces.
•
Never operate the machine without the disc guards in place.
•
Completely disconnect this machine from its power source
when changing an abrasive disc.
•
Use the right tool for the job. Do not force a tool or
attachment to do a job for which it was not designed.
•
To reduce the risk of electrical shock, never use the machine
in rain or allow it to become wet.
•
Never attach the Disc Sander to a dust extraction unit used
for wood sanding if you are sanding metal. The sparks can
cause a fire or explosion.
•
Turn the tool off immediately in the case of an emergency.
Completely remove the tool from its power source before
attempting to fix the issue.
•
Never leave tool running unattended. Turn the power off and
do not leave tool until it comes to a complete stop.
•
Do not use the tool as a toy or let children play with it. Care
should be taken when using the tool around children or
animals.
•
Avoid accidental start-ups. Make sure that the power switch
is in the OFF position before plugging the machine in or
connecting it into an appropriate electrical resource.
•
Do not overreach. Keep proper footing and balance.
•
Never stand on the machine. Serious injury could occur if the
tool tips or if the sanding disc is unintentionally contacted.
•
Only use recommended accessories. The improper use of
accessories may create a risk of operator injury.
•
Handle workpieces correctly to help protect your hands from
possible injury.
•
Support your workpiece with the supplied miter gauge or the
work table. Never “free-hand” sand a workpiece.
•
Maintain a 1/16” maximum clearance or less between table
and sanding disc.
•
Follow OSHA lock-out, tag-out procedures to prevent
accidental machine starts.
SPECIFICATIONS
Disc Sanding Machines
Model 9681310
Disc Sander
Model 9681311
Disc Sander
Electrical requirements
phase
230V, 60 Hz, single
phase
Amps AC
17.8A
11.2A
Motor Size
1.5 HP
2 HP
Disc speed (RPM)
1750
1750
Sanding disc diameter
16"
20"
Table size (L x W)
18.58" x 8.5”
22.68" x 8.5”
Table tilt-In angle
5˚
5˚
Table tilt-out angle
45˚
45˚
Dust collection port
diameter
4"
4"
Overall Dimensions
(L x W x H)
27.84" x 23.33" X 44.44"
Gross pkg. weight
266.76 lbs.
313.5 lbs.
115V, 60 Hz, single
27.75" x 27.68" x 46.44"
