7
Jr.
Sodcutter
FIGURE 7
1. Convoluted Tubing
2. Hour Meter Wire
12. Connect red wire with male connector from
convoluted harness to the black female
connector on the front of the engine. Figure 8.
FIGURE 8
13. Loosen and remove wing nut securing air cleaner
cover. Remove cover and element to allow
access to the throttle. Figure 9.
1. Wing nut on Engine
14. Route the throttle cable on the inside of the
bracket. See Figure 5.
15. Route the throttle cable through the throttle
bracket as shown in Figure 10. The cable end
shoulder should be positioned as shown against
the end of the throttle bracket. Tighten down
throttle bracket making sure not to overtighten.
FIGURE 10
1. Throttle Cable
2. Throttle Bracket
3. Swivel
4. Throttle Stop Screw
16. The swivel needs to be inserted up through the
bottom of the engine throttle lever, the swivel
washer goes on and then the swivel screw.
Figure 11.
FIGURE 11
1. Throttle Lever
2. Swivel Washer
3. Swivel
4. Swivel Screw
SET-UP
Summary of Contents for Ryan 544946A
