Page: 19/21 User Manual PULS-CTRL24, Rev.1-00: Software Utilities
Return
value
Error message
Description
-100 Device
not
connected
The port status lines indicate that
the device is not connected.
-101
Device not ready
The port status lines indicate that
the device is not ready. The com-
munication with the device is pos-
sible only if it does not execute any
process. Terminate all dialog boxes
and menus at the device and retry
the operation.
-102 Device
state
could
not be set to not
ready
The device did not react properly.
Try to reset the communication or
restart the device by powering it off
and on.
-400
Error opening the
file for debugging
output
The file for debugging output can-
not be opened for writing. Check if
you have permissions to perform
this action or if the file exists and is
opened by another application.
-401
Error closing the file
for debugging output
The file for debugging output can-
not be closed. Check if the access
to the file is still possible.
CGC Instruments
Tel.: +49 (371) 355 098–55
Hübschmannstr. 18 | D–09112 Chemnitz
Fax: +49 (371) 355 098–60
internet: www.cgc-instruments.com
e–mail: [email protected]
