Page: 65/81 User Manual PSU-CTRL-2D, Rev.1-00: Software Interface
6 hexadecimal digits for the variable
Current
(
IIIIII
),
and 5 hexadecimal digits for the variable
VoltDropout
(
DDDDD
).
The voltage values are in mV, for the parameter unit conversion, see
functions
COM_HVPSU2D_GetPSUOutputVoltage
and
COM_HVPSU2D_GetPSUOutputCurrent
.
Function COM_HVPSU2D_GetPSUHousekeeping
int COM_HVPSU2D_GetPSUHousekeeping
(WORD PortNumber, unsigned PSU,
double & Volt24Vp, double & Volt12Vp,
double & Volt12Vn, double & VoltRef);
Command: k
n
©
Response: k
nAAAABBBBCCCCDDDD
©
Saves the measured housekeeping values of the PSU module with
the number
PSU
in the variables
Volt24Vp
,
Volt12Vp
,
Volt12Vn
,
and
VoltRef
, and returns an error code according to Tab. 10.
The variable
PSU
is the number of the PSU module, for more details,
see function
COM_HVPSU2D_GetPSUOutputVoltage
.
The return values in the variables
Volt24Vp
,
Volt12Vp
,
Volt12Vn
,
and
VoltRef
are voltages in V. The first three values are the supply
voltages of +24 V, +12 V, and –12 V, the last value is the reference
voltage of the digital-to-analog converters of 10 V. The nominal values
are unsigned, i.e. 24 V, 12 V, 12 V, and 10 V.
The direct command (
k
n
©
) contains one decimal character (
n
) for the
variable
PSU
. The response (
k
nAAAABBBBCCCCDDDD
©
) contains the
decimal character (
n
) for the variable
PSU
followed by 4 x 4 hexa-
decimal digits for the variables
Volt24Vp
(
AAAA
),
Volt12Vp
(
BBBB
),
Volt12Vn
(
CCCC
), and
VoltRef
(
DDDDD
). The voltage values
are in mV, for the parameter unit conversion, see function
COM_HVPSU2D_GetPSUOutputVoltage
.
CGC Instruments
Tel.: +49 (371) 355 098–55
Hübschmannstr. 18 | D–09112 Chemnitz
Fax: +49 (371) 355 098–60
internet: www.cgc-instruments.com
e–mail: [email protected]
