The ECO-FLO fan has been duly certified as serviceable.
Manufactured on (date):
Date of sale:
Sold by:
(name of trading enterprise, stamp of store)
CONNECTION CERTIFICATE
Company name:
Electrician name:
Date:
Signature:
Due to constant product improvements, some models may differ slightly from those portrayed in
this manual.
ECO-FLO-I&M-1803
1-800-779-4021 • www.continentalfan.com
Continental Fan Manufacturing Inc.
203 Eggert Road
Buffalo, New York 14215
Continental Fan Manufacturing Inc.
6274 Executive Blvd.
Dayton, Ohio 45424
Continental Fan Canada Inc.
12-205 Matheson Blvd E
Mississauga, Ontario L4Z 3E3
ACCEPTANCE CERTIFICATE
TROUBLESHOOTING
Only qualified personnel should work on electrical equipment. Working on or
near energized equipment could result in death or serious injury.
1. If the fan fails to start, consult wiring diagram to ensure proper connection.
2. Check the incoming supply for proper voltage.
3. If the circuit breaker trips during start-up, turn off the ventilator and contact the Seller.
4. If the fan fails to start:
- Lock electrical service to the fan in the “OFF” position.
- Verify that the motor isn’t jammed and impeller isn’t clogged.
- Verify that the impeller blades aren’t soiled. Clean the blades according the Recommended
Maintenance section (page 11) in this manual.
5 . If the fan experiences low airflow:
- Adjust to a higher fan speed.
- Clean or replace the filters, and clean the fan and ERV core according the Recommended
Maintenance section (page 11) in this manual.
6 . If noise or vibration occurs:
- Tighten screws of the ventilator and exterior-mounted hood.
- Clean or replace the filters, and clean the fan and ERV core according the Recommended
Maintenance section (page 11) in this manual.
7. If fan fails to start, please contact Seller.
WARNING
