ECO-FLO ENERGY RECOVERY VENTILATOR
The ECO-FLO energy recovery ventilator is designed for through-the-wall mounting. The telescopic
design enables its installation in walls with various thickness (4.75” to 11.81”).
The delivery set includes:
•
Ventilator – 1
•
Set of small wall anchors and steel screws for the fan – 1
•
Set of large wall anchors and brass screws for the hood – 1
•
Remote control – 1
•
Installation & Maintenance Manual
Ø6”
Ø6.19”
8.38”
9.44”
10.25”
4.75” - 11.81”
5.69”
4”
5”
11.81”
12.19”
3
1
7
5
6
4
2
3
1.
Ventilation Unit
must be installed on inner side of the wall. It is equipped with an automatic
shutter that closes the air duct during ventilation standby and prevents air backdraft.
2.
Mounting Plate
is used for installation of the ventilation unit on the wall and connecting it to
power mains.
3.
Telescopic Duct
with adjustable length is where the airflow straightener, ERV core and filters
are located.
4.
Airflow straightener
eliminates air turbulence inside the ventilator.
5.
Air Filters
are designed to purify supply air and prevent the ingress of foreign objects into the
ERV core. Filters also prevent ERV core soiling.
6.
ERV Core
extracts heat from exhaust air to warm up supply airflow. The cord laid inside the
ERV core is designed to remove the core from the ventilator. The ERV core is heat insulated
with a specially designed insulating material.
7.
Exterior-Mounted Hood
must be installed on the outer side of the wall. It directs air discharge
and prevents the ingress of water and other objects into the ventilator.
MODEL
THERMAL
RECOVERY
SPEED
RPM
WATTS AMPS
CFM
SONES
@ 1M
SONES
@ 3M
SONES
(OUTDOOR)
POWER
SUPPLY
ECO-FLO*
90%
Low
610
3.80
0.024
8
0.4
0.2
0.4
120 V
60 Hz
1 Phase
Med
800
3.96
0.026
16
0.7
0.4
High
1450
5.61
0.039
32
1.0
0.5
PERFORMANCE
*Manufacture Code: RA1-50-2
IP24 protection
