Set the Speed Selection above to and the Operation Mode to to enable remote control.
The ventilator is operated with either the remote control or the buttons on the ventilator casing.
The buttons on the ventilator casing have limited functionality: only the medium and high speeds
can be activated; only three of the four modes of operation may be set.
The remote control has wider control capabilities. Guaranteed range of the remote control is 3 ft
to the receiver, which is located on the casing of the ventilator. The ventilator stores the current
operation mode and, in case of power failure, returns to this mode when power is restored.
VENTILATOR CONTROLS
SPEED SELECTION SWITCH
High Speed (3)
- Ventilator operates at maximum air capacity.
OFF
- Ventilator does not operate. Shutter is closed.
Medium Speed (2)
- Ventilator operates at 50% air capacity.
OPERATION MODE SWITCH
Ventilation Mode
- Ventilators operate in either extract or supply mode,
depending on CN7 jumper position.
Regeneration Mode
- Ventilators switch every 70 seconds between supply
and extraction, providing heat regeneration and humidity control.
Supply Mode
- Ventilators operate in supply mode, irrespective of CN7
jumper position.
REMOTE CONTROL
10
1. Power Button
2. Night Mode (ON/OFF)
When activated, ventilator switches to low speed when room light
is turned off. Activation is confirmed by a long sound signal.
3. Speed Selection
High
Medium
Low
4. Operation Mode
Natural Airflow
Supply Mode
Shutter is open; fan does not run.
Ventilators operate in supply mode, irrespec-
tive of CN7 jumper position.
Ventilation Mode
Regeneration Mode
Ventilators operate in either extract or supply
mode, depending on CN7 jumper position.
Ventilators switch every 70 seconds between
supply and extraction, providing heat regen-
eration and humidity control.
5. Humidity Control (May be activated with only the remote control)
45% Humidity
55% Humidity
65% Humidity
Humidity Control is possible only in Regeneration mode. Select desired Humidity Control set point. If humidity
exceeds the selected set point, ventilator switches to a higher speed. After reaching the desired humidity level,
ventilator switches to a lower speed. Press any speed switch to deactivate Humidity Control.
VENTILATOR CONTROL
