Figure 11
Figure 12
Figure 9
Figure 10
4 holes
7.625”
9.75”
Ø0.25”
8. Mark the fastening holes for the exterior-mounted hood and drill holes for the wall anchors as
show in Figure 9. For convenience of marking, use the back part of the exterior-mounted hood.
9. Insert the large wall anchors into the holes.
10. Disassemble the exterior-mounted hood to enable access to the fastening holes. Remove 5
screws and take off the front part of the exterior-mounted hood as shown in Figure 10.
11. Fix the back part of the exterior-mounted hood on the wall with the brass screws as shown in
Figure 11.
12. Install the front part of the exterior-mounted hood as shown in Figure 12.
INSTALLATION
7
7
