STEP 3b
Attach seat/back pads, leg frame.
● The main pad attaches where you expect it to using M10x65mm bolts [20] & washers [16].
● The back/leg pad attaches with M10x30mm bolts [19] and washers [16] upper, M10x55mm bolts
[18] & washers [16] lower.
● Slide the leg frame into the obvious position at end cap [25]. Use knob [42] to lock it in place.
● Don’t forget the little spacer washer [30] on the base, secured with the M6x15mm [34].
STEP 4
Go back through and tighten all nuts and bolts.
See? Told you we’d get through this together.
_
V.04.29.2015
7
