STEP 3a
Assemble & attach the adjustable post.
● Most of this should have been completed by the factory, meaning it should be a simple matter of
sliding the inner post [4] into the adjustment tube [5].
● Just like we did with the pivot hinge on the other end, we’ll slip a metal shaft [9] through the tube
with a bushing [8] on either side, lower between the hinge points on the base frame, then tighten
M10x25mm allen bolts with M10 flat washers [21] from the outsides.
● Connect the adjustment post to the seat/back frame in similar fashion. Slip the third shaft [11]
through the post with a bushing [8] on either side. Secure with an M10x55mm bolt [18] and M10
washer [16] on each side.
● Adjustments are locked in using knob [42].
_
V.04.29.2015
6
