CF MOTO CF1000ATR Page 59 Owner'S Manual Download

Page: 59 / 184

FEATURES & CONTROLS

Power Socket and USB Outlet

Auxiliary 12Vdc power and USB outlets are provided on the left

side front fender area for operating accessories such as hand

held spot lights and charging electronic devices. Please consult

with your dealer on the use of powered accessories with your

vehicle.

Fuel Tank

The fuel tank fill cap is located at the top of the vehicle behind

the handlebars. Cap removal is left-handed rotation. Cap

installation is right-handed rotation.

Fuel Minimum Octane Rating

The recommended fuel for your Vehicle is minimum 95 Octane

unleaded. Non-oxygenated (ethanol-free) fuel is recommended

for best performance in all conditions.

Summary of Contents for CF1000ATR

























































































































































































Search results

Summary of Contents for CF1000ATR

Reviews:

Related manuals for CF1000ATR

Brands by name

Popular brands

CF MOTO CF1000ATR, Owner'S Manual

Search results

Summary of Contents for CF1000ATR

Reviews:

Related manuals for CF1000ATR

Brands by name

Popular brands