background image

MAINTENANCE & LUBRICATION

108

NOTE

Pay special attention to the engine oil level during cold weather operation. A rise in engine oil level can 

indicate contaminants collecting in the oil sump or crankcase. Change oil immediately if the oil level begins 

to rise. Monitor the oil level, and if it continues to rise, discontinue use and determine the cause, or see 

your dealer.

Periodic Maintenance Schedule and Icon Key

Maintenance intervals in the following schedules are based upon average riding conditions and an average 

operating speed of approximately 12.4 mph (20 km/h). Vehicles subjected to severe or commercial use 

must be inspected and serviced more frequently. 

The following icon keys are used to note special circumstances: 

►= Severe Use Item. Reduce interval by 50% on vehicles subjected to severe use.
■ = Have an authorized dealer perform repairs that involve this component or system.
● = Emissions related components. Have an authorized dealer perform repairs that involve this component 

or system.

WARNING

Procedures marked as ‘■’ means if repair is required, have an authorized dealer perform repairs that 

involve this component or system. Improperly performing the procedure could result in component failure 

and lead to serious injury or death. 

Summary of Contents for CF1000ATR

























































































































































































Reviews: