MAINTENANCE & LUBRICATION
130
NOTE:
Coolant drain bolt tightening torque:10 N•m
9. Install the coolant reservoir hose.
10. Fill the recommended coolant into the radiator until it is full.
When filling coolant, at the same time to loosen tapping
screw as right picture
1
shows in order to drain potential
air bubbles inside the coolant hose, until coolant goes out,
then tighten the screw .
NOTE:
Recommended antifreeze:
High quality ethylene glycol antifreeze containing corrosion
inhibitors for aluminum engines. Antifreeze and water mixing
ratio:1:1
Total Coolant Capacity (except coolant reservoir): 3.7L
Coolant Change (except coolant reservoir): 3.6L
Coolant Reservoir Capacity: 0.2L~0.38L
(Lower mark: 0.2L / Upper mark: 0.38L)
CAUTION
Hard water or salt water is harmful to the engine.
Please use CFMOTO recommended coolant.
1
