Cetetherm AquaEfficiency EFB112 DD, Installation, Service And Operating Instruction

Page: 49 / 86

Cetetherm AquaEfficiency
Installation, service and operating instruction
47
12.3 Menu Continue
Menu Sub-menu Sub-menu Sub-menu Description
Continue Operating hours Viewing operating hours of internal
parameters
Trending Points in trend Select variables to trend for example
temperature sensors
Display Trend buffer View the records
Interface Config
(com) C-Bus Factory pre-set, must be checked
Ctr# Factory pre-set
B-port 9600 Factory pre-set
Append bus number
to data point name activated
RF Teach-in N/A
Modbus Device ID 10
Baud Rate 9600
Parity NONE
No. Stop Bits 1
Time Program Solar See 11.14 Solar menu
Main It is SP_T_Sec_Oulet (main temperature
program).
See
11.4 S1 Menu Secondary Outlet .
TSP_Amb See 11.8 S5 Menu Outdoor
Temperature .
Multi Pulse See 11.15 230V Triac menu
Therm. treatment See 11.9 Thermal Treatment Menu
Point Data Internal paraI/O visualisation
Analog input Sensor values
Pseudo Analog Can be set points or internal parameters
Analog Output Valve and pump output signals
Binary input Ipsothermic contacts from pumps,
remote contact
Pseudo Binary Internal flags
Binary Output Pump start/stop contacts, relays
contacts, 230V Triac
Totalizer N/A
Remote Analog N/A
Remote Binary N/A
System Data System information
Parameters N/A
Date/Time Clock settings
System Info Hardware/Software info (version, date)
Interface Config Access to Modbus parameters
See
16.3 Change Modbus parameters .
DDC Times Program's time constant
Flash memory Info on flashing. Allows saving all
settings. It can be reloaded after a Reset