Opening locking devices
OMEGA ACTIVE Programming Instructions
45
Opening electronic shields
Passive locking media (125 kHz series)
1.
Touch the proximity
sensor (1).
2.
Within two seconds,
hold your authorized
locking medium (2) in
front of the outside
shield (3) of the IES.
The reader module in the outside shield detects the locking
medium. The green LED and a short beep of the reader
module signal the enabled status.
The handle is coupled with the lock.
Use the handle of the outside shield to open the door.
If you are using a locking medium that is not authorized to
enable the IES, the light at the IES flashes red four times and
you hear four successive beeps. In this case, the handle is not
coupled with the lock. You can operate the handle but this will
not unlock the lock.
