Opening locking devices
OMEGA ACTIVE Programming Instructions
52
52
Insert the RF-Stick in a free USB port of your PC (or
netbook).
The driver should be installed automatically. If it is not, install
the driver manually (you will need administrator rights for your
PC):
Start the hardware recognition of your operating system to
install the driver from this path.
To do so, select "Control Panel"
"Devices and Printers"
"Add device".
For the hardware installation open the following file path:
C:\Programs\Omega\Driver\Active\RfStick\
Follow the instructions of your operating system for the
installation.
The installation is now complete and you can start using the
RF-Stick.
Launch the OMEGA ACTIVE software and log in.
After a few seconds the two status messages "System ready"
and "RF-Stick ready" appear in the status line.
If these two status messages do not appear, repeat the
driver installation or call your system administrator for
trouble-shooting.
After the two status messages have appeared:
Edit your locking system as desired.
You will then see a new status message "Programming
required".
Go to the "Other" menu and select "Program changes".
OR
select "Programming" in the upper menu bar and click
on "Reprogramming all devices".
You will now see two new status messages in the status line
"Programming running" and "RF-Stick ready for programming".
