Introduction
10
Access Point
Other features of the Access Point:
Integrated 868 MHz RF transceiver.
The maximum range for reading locking devices inside of
buildings is 25 m without and 40 m with the optional
additional antenna.
Power supply of the Access Point with the supplied power
pack. No other power supplies are permitted.
Two colour LEDs at the Ethernet connection for visual
signalization of data traffic.
Available accessories for the Access Point:
D-LAN™ adapter (System Powerline, to implement IP
networks using the 230 V power network). This option
makes it possible to transmit the network signal via the
230 V power network using suitable adapters. This means
that no separate network cables must be installed.
PoE (Power over Ethernet) adapter. To reduce the
installation expense and increase the failure prevention you
can supply the Access Point with power via the network
interface. This eliminates the need to use the plug-in power
supply.
Antenna retrofit kit to increase the range for reading locking
devices to a maximum of 40 m.
The stated reading ranges of 25 m, and 40 m
respectively, cannot be guaranteed as the reading
range depends on the local building conditions.
CEStronics recommends to have your building
situation checked by your professional CEStronics
partner.
For further information on the available options,
please contact your CEStronics partner.
