Introduction
Access Point
9
Introduction
Description
The Access Point is part of the OMEGA ACTIVE system. It
establishes the connection between the OMEGA ACTIVE locking
devices and the overall control centre via a radio frequency
(RF) link. This overall control centre is a commercial PC.
The Access Point is connected with the control centre via an
RJ45-Ethernet cable (10/100 Mbit). The Access Point is thus
the network interface of the system.
The desired access authorizations are created in the control
centre and transmitted via the Ethernet to the Access Points.
The Access Points then transmit the authorizations over the RF
link to the locking devices.
In return, the log data are retrieved from the cylinders and
then fed back to the control centre via the Ethernet.
The wide range of the Access Points allows a wireless
deployment of locking cylinders and wall terminals. No further
installation work on your doors is required.
If you use OMEGA ACTIVE locking media with a push-button,
you can use the push-button to control the relay contact in the
Access Point. The relay contact is directly controlled with this
button.
A wireless system always comprises a PC, the
OMEGA ACTIVE Client software, a number of Access
Points for data exchange and at least one locking
device.
