Fitting the additional antenna
Access Point
29
To fit the additional antenna, proceed as follows:
1.
Disconnect the power
supply.
Remove the cover from
the Access Point case, as
described on page 22.
Remove the cover plug
(1) at the Access Point if
it exists.
2.
Remove the jumper (2).
The jumper must be
removed for the operation
with the additional
antenna.
The jumper (2) may only be
set when the Access Point is
operated with its internal
antenna.
Guide the SMA connector
through the hole (3).
3.
Attach the SMA connector
(4) with the flat key to
the bushing (5) inside the
Access Point.
