U100.4.0
4
1.2 Warrior MU-X15 HH2S-9XL10 Handheld Remote
A Warrior MU-X15 HH2S-9XL10 handheld has eight 2-stage buttons plus STOP and
HORN/START. The handheld is powered by two 1.5V AAA batteries. Once associated to a
receiver, the handheld stores
one
receiver ID in its memory. One or more handhelds are
associated to the receiver at Cervis before it is shipped. The user can use the Association
process described in Heading 4.0 to change the ID in a handheld memory. Refer to section 4.4
(Factory Reset) to clear the handheld memory so that it will not control any receiver.
The Warrior MU-X15 HH2S-9XL10 has four LEDs that are used to identify system status and
provide diagnostics. LEDs as shown in Figure 2 are:
Transmit/Receive
(TX/RX);
Battery
Status
;
A Selection
; and
B Selection
.
Figure 2. Warrior MU-X15 HH2S-9XL10 Handheld Remote
Warrior MU-X15 HH2S-9XL10 Handheld Remote Features
Powered by two 1.5V AAA batteries
Low Battery Warning and Low Battery Auto-Shutdown
900MHz license free operation @ 100mW
Rugged compact design
Protective rubber bumper and detachable wrist lanyard
Four Diagnostic LED indicators
Ten two-step actuators
Operating temperature of -40°C to +60°C (-40°F to +140°F)
Storage temperature of -40°C to +85°C (-40°F to +185°F)
