Certikin MB20S, Operating, Installation And Servicing Instructions

Page: 3 / 40

1.0 Technical data
3
Genie S
1.0 TECHNICAL DATA 4
1.1 User operating and safety instructions 5
2.0 REQUIREMENTS 7
2.1 Pool chemistry 7
2.2 Cleaning 7
2.3 Safety and maintenance 7
2.4 Water temperature settings 7
2.5 Winterisation 7
2.6 Gas safety regulations 8
2.7 Location of heater 8
2.8 Gas supply 9
2.9 Gas conversion 9
2.10 Flueing 9
2.11 Air supply 9
2.12 Outdoor heaters 9
2.13 Flue terminal positions 10
2.14 Condensate drain 11
2.15 Pool pump and pipe work 11
2.16 Electricity supply 11
3.0 INSTALLATION OF HEATER 12
3.1 Procedure 12
3.2 Outdoor terminal 12
3.3 Other fl ue systems 12
3.4 Wall terminal 12
3.5 Heater & terminal dimensions 13
3.6 Flue examples and fl ue kit part codes 15
3.7 Terminal guard and roof terminal 17
3.8 Pool water plumbing 17
3.9 Condensate connections 17
3.10 Electrical connections 19
3.11 Gas connection 19
3.12 Wall mounting kit 20
3.13 Multiple heater kit 22
4.0 COMMISSIONING 24
4.1 Removal of primary air 24
4.2 Prior to burner operation 25
4.3 Pool water pressure switch 25
4.4 Conversion to LPG 25
4.5 Commissioning the burner 26
4.6 User setup mode 27
5.0 FAULT FINDING 28
5.1 Operation, safety controls & lockouts 28
5.2 Setup modes 28
5.3 Fault codes & diagnostics 29
5.4 Schematic wiring 32
6.0 SERVICING 33
6.1 Routine servicing 33
6.2 Changing components 34
6.3 Spares 36
6.4 Heater components illustrations 36
7.0 INSTALLATION & SERVICE HISTORY 38
Section Page
Contents