6
TrueComfort System
Safety
continued
When working with insulation, always wear a long-sleeved shirt, gloves, a hat, goggles or safety glasses
for eye protection. Use 3M brand #8710 nose/mouth dust mask (or equivalent) for respiratory protection.
Safety rules:
• Do not operate the machine without the hopper firmly attached to the base.
• Always use the supplied power cord with this machine at all times.
• Never reach into the hopper while operating.
• Rotating agitator blades can cause severe injury. Stop all motors and disconnect the power cord before
attempting to remove any foreign object or jam.
• Never operate this equipment if the operator or the machine is standing in water, snow or rain.
• Never point insulation hose in the direction of people or pets.
• Do not operate this equipment when minors are present or leave unattended.
Always disconnect power from machine before leaving unattended.
SYMBOLS
The following signal words and meanings are intended to explain
the levels of risk associated with the use of the TrueComfort System.
SYMBOL
SIGNAL
MEANING
DANGER
Indicates an immediate hazardous situation which,
if not avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation which,
if not avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.
Safety
SERVICE:
Servicing requires extreme care and knowledge
and should be performed only by a qualified
service technician. For service, we suggest you
return the product to the nearest
AUTHORIZED
SERVICE CENTER
for repair. When servicing,
use only original equipment replacement parts.
WARNING:
Servicing requires extreme care and knowledge
and should be performed only by a qualified
service technician. For service, we suggest you
return the product to the nearest
AUTHORIZED
SERVICE CENTER
for repair. When servicing,
use only original equipment replacement parts.
WARNING:
The operation of any blowing insulation products can result in foreign objects being thrown into your eyes,
which can result in severe eye damage. Before beginning operation, always wear safety goggles or safety
glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for
use over eyeglasses or standard safety glasses with side shields. Always wear eye protection that marked
to comply with ANSI Z87.1.
Summary of Contents for TrueComfort
Page 18: ...18 Electrical Diagram TrueComfort System Electrical Diagram ...
Page 30: ...30 Notes ...
Page 31: ...31 Notes ...
