56
The routing template kit can be used to
enlarge holes for racking as well
as to create transitions for stepping,
changing heights or styles.
Install 3/8" router blade and
5/8" bearing or router guide. Any
substitutions may result in improper
hole size or damage to the template kit.
NOTE: Template cutout size is
designed to be 1/8
"
larger than the
finished cut to allow bearing to follow
the shape.
Select the appropriate template for
the application.
Assemble the template as shown,
configured for the desired post size
(4" or 5").
NOTE: It is advisable to practice
routing on a scrap piece before
attempting actual cut.
Mark location of hole to be routed.
Offset template cut by 1/8" to allow for
bearing (i.e., if hole is to be located
3" from top of post, position edge of
template 2-7/8" from top).
Tighten wing nuts. Place on a flat, firm
surface to prevent tipping.
Route hole per manufacturer’s
recommendations.
ALWAYS WEAR SAFETY GLASSES.
Loosen wing nut and remove template.
For situations that require a larger hole
to accommodate racking, route a
standard hole, loosen wing nuts and
slide template to new position to route
excess material.
Insert 5/8" bearing over router bit shank.
Bearing will follow cutout in template.
A
B
C
D
F
G
H
I
E
OUTSIDE HOLES FIT
OVER 5 X 5 POST
INSIDE
HOLES FIT
OVER
4 X 4 POST
A
B
C
D
ROUTING TEMPLATE
1-1/8" TEMPLATE SPACER PLATE
1-1/2" TEMPLATE SPACER PLATE
1/4" -20 X 6" BOLTS
3/8" OD PLEXI TUBE
1/4" FLAT WASHER
1/4" -20 WING NUT
3/8" ROUTER BIT W/ 1/4" SHANK
5/8" BEARING W/ 1/4" ID OPENING
E
F
G
H
I
Post Routing Template Kit
Breezewood template also available. Contact your Territory Manager for
more details.
Each kit comes in a carrying case suitable for field use
Breezewood Template
