3
Safety
The
BOLT 3
insulation blowing machine has full mechanical guarding and electrical
disconnects for your safety.
When using the
BOLT 3
machine the following precautions
should always be followed:
1.
Read all the instructions before using the insulation blowing machine.
2.
Never operate the machine without all guards in place.
3.
Never operate the machine without the hopper in place.
4.
Never attempt to override safety devices.
5.
Never operate the machine near children or pets.
6.
Never reach into hopper or make contact with moving parts.
7.
Never operate this equipment if the operator or equipment is standing in water, snow
or rain.
8.
Always unplug both power cords before removing the hopper or any guards.
9.
Always unplug both power cords before servicing or cleaning the machine.
10.
Do not operate the insulation blowing machine with a damaged cord or plug.
11.
Store insulation blowing machine indoors when not in use.
12.
Use of Power Cords
The machine requires the use of two power cords, rated for at least 15 amps
The power cord shall be a grounded, 3-wire cord
The power cords shall be rated for outdoor use
Connect to properly grounded outlets only
Summary of Contents for BOLT 3
Page 8: ...6 Figure 1 3 1 9 4 5 6 7 8 10 11 12 ...
Page 17: ...15 Figure 8 ...