Cermetek Microelectronics, Inc Page 22 of 42
Document NO. 607-00xx Revision A (12/13)
3.3
Access Point Interface Configuration Page
Figure 20, below, allows the user to set the parameters to be used when the CH232BGN module
works as an Access Point. Options include the WiFi networking mode (802.11 b, g, or n), network ID,
Security Mode, and LAN setup.
Figure 20: Access Point Interface Configuration Page
3.4
Station Interface Configuration Page
This page, Figure 21 below, sets the parameters for the CH232BGN module when configured as a
Station. The parameters to be set include the SSID of the local Access Point and the type of network
addressing: DHCP or static IP address.
Figure 21: Station Interface Configuration Page
