Cermetek Microelectronics, Inc Page 23 of 42
Document NO. 607-00xx Revision A (12/13)
3.5
UART Configuration
The UART configuration page sets the serial port communication parameters, including UART settings
and high layer network protocols which support serial communication. See figure 22 below.
Figure 22: UART Configuration Page
Notes: Network protocols typically support three modes:
TCP Server, TCP Client, and UDP. UDP has
no server or client requirement.
When used in a mode other than as a TCP Server, the user must set the IP address of the
device. No IP Address is required when the CH322BGN is used as a TCP server.
The Port ID must be the same for the devices on each end of the communications link.
