- 4 -
O2X
DUO
4.
Unpacking the sensor
The unit has been tested and approved before delivery from the supplier. Please check
to confirm that no visible damages occurred during shipment.
Damages
If damages occurred during shipment, immediately contact the forwarder as well as
your Cerlic representative. The shipment can be returned only after contact has been
made with Cerlic.
Packaging
The original packaging is designed to protect the equipment and should be used for
storage or if the goods must be returned.
Content
Please check that the content corresponds to your order and packing list.
You will also need an electrode (below) to get the sensor working:
Optional parts for O2X DUO:
•
Clark Electrode cartridge.
P/N
11805160
•
Optical Cell cartridge
10306099
•
Protection plates for Electrodes/Optical Cells Membranes
10305470
•
Sensor Holder
11205541
•
Telescopic Rod, 3 sections, Fiberglass 4 Meter (13,1’)
20205652
•
Stainless steel Handrail Mounting bracket X, including rod holder 11205539
•
Adjustable SS slide rail and sensor holder 66 mm
11205600
•
Solenoid valve for flushing, 230 VAC
Inlet hose
∅∅
16mm (5/8”) , to sensor
∅∅
8mm (1/4”)
11705516A
•
Solenoid valve for flushing, 115 VAC
Inlet hose
∅∅
16mm (5/8”) , to sensor
∅∅
8mm (1/4”)
11705516B
•
Aluminum mounting plate predrilled for BB2 or solenoid valves 10305532
and connection boxes w/ u-bolts.
•
Aluminum mounting plate predrilled for BB2 and solenoid valves 10305851
and connection boxes w/ u-bolts.
•
10 meter (33 ft) M12 extension cable with plug-in connectors.
20805510
•
30 meter (100 ft) M12 extension cable with plug-in connectors.
20850727
•
Connection box for two sensors to one BB1/BB2 control box with 11505748
1m. (3 ft) cable to connect to BB1/BB2
•
Connection box for four sensors to one BB1/BB2 control box with 11505785
1m (3 ft.) cable to connect to BB1/BB2
