CERIO software core : cen_v3.0
Session Timeout
: The Session timeout is in the range of 0~60 seconds. The default
is 0 to disable re-authenticate service. Amount of time before a client will be
required to re-authenticate.
WEP 802.1X :
When WEP 802.1x Authentication is enabled, please refer to the following
Dynamic WEP and RADIUS settings to complete configuration.
Authentication Radius Server Settings
:
IP Address
: Enter the IP address of the Authentication RADIUS server.
Port
: By default, it’s 1812. The port number used to communicate with RADIUS
server.
Shared secret
: A secret key used between system and RADIUS server. Supports 8
to 64 characters.
Session Timeout
: The Session timeout is in the range of 0~60 seconds. The default
is 0 to disable re-authenticate service.
Amount of time before a client will be required
to re-authenticate.
4.10 Repeater AP MAC Filter Setup
Continue
Virtual AP Setup
section. For each Virtual AP setting, the administrator can allow or
reject clients to access each Virtual AP.
