CERIO software core : cen_v3.0
Click
Save
button to save your changes. Click
Reboot
button to activate your
changes
4.4
Wireless General Setup
The administrator can change the data transmission, channel and output power settings for the
system. Please click on
Wireless -> General Setup
and follow the below setting.
MAC Address :
The MAC address of the Wireless interface is displayed here.
Band Mode :
Select an appropriate wireless band; bands available are
801.11 a/n
mixed
mode or pure a mode or pure n mode etc.
Country :
a region, the OW-215N2-X support region for US,ETSI and Japan
TX Power :
You can adjust the output power of the system to get the appropriate coverage
for your wireless network. Specify digit numbers between level
1
to level 9 (the unit is %) for
your environment. If you are not sure which setting to choose, then keep the default setting
level 9 (
100
%).
RF(On/Off) Schedule :
The AP
RF
Signal on/off by time Policy
HT Physical Mode
Tx
/
Rx Stream :
By default, it's
2
Channel Bandwidth :
The "
20/40
” MHz option is usually best. The other option is
available for special circumstances.
