CERIO software core : cen_v3.0
7.3 MAC Filter by CPE mode
Allows to create MAC filter rules to allow or deny unicast or multicast packets from limited number
of MAC addresses. Important and must note. That MAC filter rules have precedence over IP Filter
rules.
Please click on
Advance -> MAC Filter Setup
and follow the below setting.
Click
Save
button to save your change. Two ways to set the MAC Filter List
MAC Filter Rule :
By default, it’s “
Disable
”. Options are
Disabled
,
Only
Deny List MAC
or
Only
Allow List MAC
.
Action :
Only Allow List MAC
:
The wireless clients in the MAC Filter List will be
allowed
to access to Access Point; All
others will be denied.
Only Deny List MAC
The wireless clients in the MAC Filter List will be
denied
to access to Access Point; All
others will be allowed.
MAC Address :
Enter MAC address (e.g. aa:bb:cc:00:00:0a) and click “
Add
” button, then the MAC address
should display in the MAC Filter List.
There are a maximum of
20
clients allowed in this MAC Filter List. The MAC addresses of the
wireless clients can be added and removed to the list using the
Add
and
Delete
buttons
.
Schedule :
Can choose to use rule by “Time Policy”
Click
Reboot
button to activate your changes
