53
addresses of the wireless clients can be added and removed to the list
using the Add and Remove buttons.
6. WISP + AP Mode Configuration
When WISP + AP Mode is chosen, the system can be configured as an WISP + AP Mode. This
section provides detailed explanation for users to configure in the WISP + AP Mode with help of
illustrations. In the WISP + AP Mode, functions listed in the table below are also available from the
Web-based GUI interface.
6.1 Chose Your Operating Mode (
WISP + Repeater AP Mode
)
The system administrator can set the desired mode via this page, and then configure the
system according to their deployment needs, Please click on System -> Operating Mode and
follow the below setting.
6.2 Configure CPE(WAN) Setup
It can be used as an Router AP with WDS function. In this mode, 100GX-N is a gateway enabled
with NAT and DHCP Server functions. The wireless clients connected to Internet.
There are Four connection types for the WAN port :
Static IP
,
Dynamic IP
,
PPPoE
and
PPTP
.
Please click on
System -> CPE
and follow the below setting.
