Century Helicopter Products Raven 30 V2 Instruction Manual Download Page 1

Page: 1 / 22

Raven

30/50 V2

Instruction Manual

R30

R50

MAIN ROTOR

550mm

600mm

TAIL ROTOR DIAMETER

9.7 in

OVERALL LENGTH

46 in

47.5 in

HEIGHT

15 in

BLADES

550mm

600mm

ENGINE

32 ~ 40

Century Helicopter Products

Designed and Developed in USA

SPECIFICATIONS

2oz Header Tank w/ CNC
Machined Mount or Die-
cut Mount

CN2137

CN2213 Machined Mount
CN2137 Die Cut Mount

Aluminum Turbo
Cooling Fan

Increased 15% air flow, lower
engine drag and smoother high
speed operation.

CN2202A Turbo cooling fan

our kits will save some of you hard earned
cash. We have crash kits available for 30 and
50.

( Includes tailboom, Wood blades,
Flybar, Main Shaft & Head Spindle )

CRASH KIT

CN2230HS Crash Kit - 30
CN2230FS Crash Kit - 50

Carbon Fiber Tail Boom

3D flying has high demands from
your helicopter, a carbon tail boom
exceeds all standards for strength and
stiffness.

CN2126H Carbon fiber tail boom 30
CN2126F Carbon fiber tail boom 50

To completely eliminate

slop on control surfaces

(for plastic servo outputs).

CN2189A

(Fut) Arm set

CN2185A

(JR/Air) Arm set

CN2181A

(Hitec) Arm set

Boy! these caps and washers make
you look like a “ PRO” (colors:
Silver, Red, Blue, Gold, Purple,
Green, Black 10pcs/pack)

CNC Machined Finish
Cap & Washer

CN2217 (screw cap)
CN2218

(nut washer)

Adapts to starter shaft push into rubber
insert. For all 30/46 SE (come with
adapter).Extension adapts to most starters.

Reversible One Way &
Hex Start
System

CN0427

One way hex start

CN0427WD extension only

Neon Glow Color
Hot Dog
Paddles

3D switchless inverted pilots
must try out these lightning
quick paddles! 3& 4 mm.

CN2079Y

Neon Yellow 3mm - 30

CN2079R

Glow Red 3mm - 30

CN2079O

Glow Orange 3mm - 30

CN2079YA

Neon Yellow 4mm - 50

CN2079RA

Glow Red 4mm - 50

CN2079OA

Glow Orange 4mm - 50

Century Optional Upgrades

(Raven 30/50)

O.S. Throttle Extension

Aluminum C.N.C. machined
throttle extension (purple andized)

CN2153 32SXH, 46FXH & TT36H
CN2154 50SXH

Carbon Graphite

Tail Boom Support

Super high quality, extremely
light weight and ready to install
dual tail boom support kit.

CN2128 Carbon Tail Struts R30
CN2128C Carbon Tail Struts R50

Tuff landing Gear Systems

3 times tuffer than most 30-40
size helicopter landing gear.
Tuff struts act as shock absorb-
ers which help reduce jolts
caused by hard landings.

CN2243 Tuff landing gear

(Raven & all 30 heli)

Hot Dog 3-D C
arbon Fin set

3D Hot Dog pilot can’t miss this light

and durable carbon fiber tail fin set.

CN2240H Hawk carbon fin set

Any pilot moving into 3D or
aerobatics should miss this item.
Transfers all loading from the regular
radial bearings to the thrust bearing.

CN2220A Thrust Kit 10mm

10mm

Hot Dog Main

Shaft Thrust B.B. Kit

Color Gelcoat FRP
Canopy w/Fin Set

Century proudly introduces our
highest Quality FRP colored canopy
w/ Fins (Blue, Yellow & Green) for
all 30/46 SE

CN2242AP Red, Yellow, Blue

CN2242G Canopy w/ Fins Green

CN2242B Canopy w/ Fins Blue

CN2242Y Canopy w/ Fins Yellow

Speed Torpedo HV II
Tuned Muffler

Finally a more powerful, larger,
quieter tuned muffler come out to
improve your engine performance.

CN3033 for R30
CN3033B for R50

(Raven 30/50)

Millenium Tuned Pipe

CN3055H for R30
CN3055F for R50

Feature the highest performance
and quality construction for all
the Raven 30 and 50 class.

CNC Machined Aluminum
Servo Arm
Pack

(Raven 30/50)

CN2213

(Hawk, Falcon &
Raven)

Summary of Contents for Raven 30 V2























Search results

Summary of Contents for Raven 30 V2

Reviews:

Related manuals for Raven 30 V2

Brands by name

Popular brands

Century Helicopter Products Raven 30 V2, Instruction Manual

Search results

Summary of Contents for Raven 30 V2

Reviews:

Related manuals for Raven 30 V2

Brands by name

Popular brands