manualshive.com logo in svg

Century Heating CB00026, Installation And Operation Manual

The Century Heating CB00026 is a high-quality heating unit designed to provide efficient and reliable warmth. To ensure a trouble-free installation and operation, it comes with an all-inclusive Installation and Operation Manual. This comprehensive manual is available for free download at manualshive.com, offering step-by-step instructions and guidelines for optimal use.

Share
Download
background image

Page 9

Installation and Operation Manual - FW2900

ENGLISH

2.2  Specifications

Maximum log length

10 

20 in (508 mm) east-west

Flue outlet diameter

6 in (150 mm)

Recommended connector pipe diameter

6 in (150 mm)

Type of chimney

ULC S629, UL 103 HT (2100 

°

F)

Baffle material

Vermiculite

Approved for alcove installation

Yes

Approved for mobile home installation

11 

Yes

Type of door

Simple, glass with cast iron frame

Type of glass

Ceramic glass 

Blower

Optional (up to 100 CFM)

Particulate emission standard

12 

EPA / CSA B415.1-10

USA standard (Safety)

UL 1482, UL 737

Canada standard (Safety)

ULC S627

10

 North-south: ends of the logs visible, East-west: sides of the logs visible.

11 

Mobile homes (Canada) or manufactured homes (USA): The US Department of Housing and Urban Development describes “manufactured homes” 

better known as “mobile homes” as follows; buildings built on fixed wheels and those transported on temporary wheels/axles and set on a permanent 
foundation. In Canada, a mobile home is a dwelling for which the manufacture and assembly of each component is completed or substantially 
completed prior to being moved to a site for installation on a foundation and connection to service facilities and which conforms to the CAN/CSA-
Z240 MH standard.

12

 Tested and certified in compliance with CFR 40 part 60, subpart AAA, section 60.534(a)(1(ii) and draft ASTM WK47329-14.

Summary of Contents for CB00026

























































Reviews:

No comments

Related manuals for CB00026

Quadra-Fire 3100 Series Installation, Operation And Maintenance Instructions preview
3100 Series
Brand: Quadra-Fire Pages: 32
Pacific energy SPECTRUM Installation And Operating Instructions Manual preview
SPECTRUM
Brand: Pacific energy Pages: 24
Marksman 5038673660912 Instruction Manual preview
5038673660912
Brand: Marksman Pages: 8
Duraflame DFS-500-4 Manual preview
DFS-500-4
Brand: Duraflame Pages: 18
Olsberg Santorini-Compact 23/535 Instruction Manual preview
Santorini-Compact 23/535
Brand: Olsberg Pages: 28
HearthStone Tribute 8040 Owner'S Manual preview
Tribute 8040
Brand: HearthStone Pages: 31
MCZ MUSA Hydromatic 16 M1 Installation Manual preview
MUSA Hydromatic 16 M1
Brand: MCZ Pages: 48
Vendor Development Group BESTC-1500 Owner'S Manual preview
BESTC-1500
Brand: Vendor Development Group Pages: 8
Drolet Contempro 1300 Technical Data preview
Contempro 1300
Brand: Drolet Pages: 2
Zempire 0150803 Manual preview
0150803
Brand: Zempire Pages: 2
arilex 120CG70H Instruction Manual preview
120CG70H
Brand: arilex Pages: 55
England's Stove Works 25-CB120 Installation & Operation Manual preview
25-CB120
Brand: England's Stove Works Pages: 118
Coleman 9740A Series Instructions For Use preview
9740A Series
Brand: Coleman Pages: 2
Coleman 9710 Instructions For Use preview
9710
Brand: Coleman Pages: 2
Coleman 9422 Series Instructions For Use Manual preview
9422 Series
Brand: Coleman Pages: 16
Nordica TERMOCUCINOTTA DSA Instructions For Installation, Use And Maintenance Manual preview
TERMOCUCINOTTA DSA
Brand: Nordica Pages: 60
Univa G002 Handbook preview
G002
Brand: Univa Pages: 8
LA NORDICA Giulietta Instructions For Installation, Use And Maintenance Manual preview
Giulietta
Brand: LA NORDICA Pages: 52

Brands by name

Popular brands

Load more brands