page 9
www.CentSys.com
The
VERT-X
operator has been designed to safely and cost-effectively automate a
domestic swing gate.
Combining an innovative open-nut drive system, advanced diagnostic capabilities and
functionality, rugged die-cast aluminium construction and exceptional aesthetics for
a wholly unobtrusive installation,
VERT-X
is positioned firmly at the apex of swing
gate automation. In addition, the engineering team behind its design has invested
considerable effort ensuring that the operator is as easy to install as it is powerful,
and as reliable as it is good-looking.
The fail-safe and fully redundant position and collision detection system has been
designed and tested to set the standard in safety of operation and to provide an
unparalleled level of reliability and durability in operation.
The gate travel limits are managed by a sealed double-redundant opto-electronic system
that has been designed not only to ensure ultra-reliable operation, but also to ensure
precise position and trajectory control. This enables very accurate and reliable collision
detection to ensure safe operation even under trying conditions.
The control card has been designed to be easy and intuitive to use with helpful
instructions on the status of the operation during and after the installation. It also has a
built-in diagnostic procedure that can verify every aspect of the control card onsite.
Some of the advanced features offered by the
V-Series Controller
are:
• Fully automated single-button Limit Setup for single and double swing gates
• Full graphics LCD display provides an intuitive user interface with built-in diagnostics to
speed up and simplify the installation process
• Separate safety inputs for infrared beams on both the closing and opening directions of
the gate
• Advanced closed-loop speed control to maintain safe and reliable operation of gates even
under windy conditions
•
Fully configurable gate Run Profiles
• Selectable and adjustable Autoclose with pushbutton override
•
Pedestrian (Partial) opening with automatic closure
• Free-exit input
• Positive Open and Close Modes for gate locks and electric fence contacts
• Support for Inward and Outward opening gates
• Multiple Modes of Operation
• Solenoid lock drive output up to 2A
• Holiday Lockout
• A status LED output to indicate the gate status remotely
• Pillar Light control
• Leaf delay is selectable for either gate leaf
• Onboard code-hopping receiver with selective adding and deleting of remotes
S
ECTION
1
GENERAL
DES
CRIPTION
1. General Description
S
ECTION
1
GENERAL
DES
CRIPTION
