S-Class Professional:
Connecting the modules with the substructure:
There are several methods to connect the modules
to substructure: by clamping the modules from the
front (examples A and B) or by bolting the modules
from the back (example C) using the provided at-
tachment holes .
Use a torque wrench for installation . The required
tightening torque for the above samples is 14 .8 lb ft
(20 Nm) . Use M6 bolts made of V2A . Only use the
provided holes for installation . If any further holes
are drilled, the warranty will no longer apply . For
laminates, use the explicit installation instructions
contained in the installation manual of the selected
mounting system . Always use appropriate corro-
sion-proof fixing materials for installation.
Example A:
Clamping plate
Example B:
Clamping wing
Example C:
Direct bolting
430 mm
± 100 mm
430 mm
± 100 mm
19
EN
