Using of BioTec Plus boiler are consist of using of left part of the boiler (fuel: wood) and using of right
part of the boiler (fuel: wood pellets). On boiler control unit is necessary to choose which side of the
boiler will be used (which fuel will be used). Below is shown procedure for choosing boiler side for
work when is boiler turned off (working phase „OFF”).
PROCEDURE FOR CHOOSING BOILER SIDE FOR WORK (USED FUEL):
Example: Selecting wood pellets for active fuel (right side of the boiler).
Left and right side of the boiler have indicators (A and B) which shows which of these two side are
active (which fuel are choosen). Active side have green indicator, inactive side have red indicator
(red „x”). On figure above is example for switching from left side of the boiler to the right side of the
boiler (from wood to wood pellets). It’s necessary to press and hold for 3 seconds indicator on
inactive boiler side (figure 1, indicator B). On display will be displayed message „Do you want
choose wood pellets for active fuel?” (figure 2). Press „OK” button (figure 2). Now left side of the
boiler have red inactive indicator, right side of the boiler have green indicator of activity (figure 3.).
2
1.1 CHOOSING BOILER SIDE (choosing fuel)
1
Hold this button for 3s!
A
B
3
A
B
Choosing boiler side (choosing fuel)
Technical instructions CONTROL UNIT
BioTec Plus
8