Screen
CONTROL UNIT SWITCHING ON
If in the main menu - ’’DISPLAY’’, the option ’’LANGUAGE SELECTION’’ is ’’DISABLED’’, the initial
message will appear on the screen (see figure below). The message will be displayed as long as it is
set in the menu ’’INITIAL MESSAGE TIME’’ or until the ’’OK’’ button is pressed.
When turning on the main switch, the screen should not be pressed (by finger...).
If the screen is pressed (during the main switch turn on) on the screen will be
displayed the message "Firmware update" and control unit is in ”software
update“ mode (this option can be used only by an authorized person). If this
happens, it is necessary to turn off the main switch and restart without any
pressure on the screen.
After turning on the main switch, screen will display language selection menu and software version.
To select the language, press the flag of language you want.
Software version
Language selection
Boiler power
(25, 35, 45 kW)
The possibility of online
monitoring of the boiler
operation and online boiler
managing
(
additional equipment
- it is necessary to switch on Wi-Fi
module)
’’OK’’ button
Initial message duration
(countdown)
Software version
Boiler power
(25, 35, 45 kW)
Technical instructions CONTROL UNIT
BioTec Plus
2