EU -V1
3
1
Safety
To ensure reliable operation, pay attention to the following important
information.
1.1
Safety information
The tools may have sharp cutting edges and can cause cuts.
Wear protective gloves when changing the tool!
When used with rotational motion, protective covers should
be used in accordance with the EU Machinery Directive.
1.2
Intended use
CENTRO|P.WD is a precision tool and must be handled with appropriate care.
Avoid mechanical, chemical or thermal effects that exceed the stress levels
normally encountered in proper use.
Only technically trained personnel should clamp tools and insert the
CENTRO|P.WD collet into the chuck while observing the technical data for
the chuck.
Avoid long-term contact with corrosive and solvent-based
chemicals.
In order to avoid damage, the brass pin may not be actuated
without a tool. The brass pin serves exclusively as a travel limiter,
not for locking/unlocking.
