EU -V1
4
2
Clamping / unclamping
2.1
Usable shaft types
Cylindrical shape B as per DIN 1835 Part 1 and DIN 6535 HB shape B with
lateral driving planes.
2.2
Inserting the tool into the CENTRO|P.WD collet
Risk of injury!
Wear gloves when inserting the tool.
Clean all components before use!
The brass pin serves as a travel limiter, not for unlocking or as an
ejector!
a)
Insert the tool into the collet.
(Clamping surface of the tool parallel to the key).
b)
Push the tool into the collet until the key lifts and then engages.
