background image

Page 2

SKU 97053

For technical questions, please call 1-800-444-3353.

SAVE THIS MANuAL

Keep this manual for the safety warnings and precautions, assembly, operating, 

inspection, maintenance and cleaning procedures.  Write the product’s serial number 

in the back of the manual near the assembly diagram (or month and year of purchase if 

product has no number).  Keep this manual and the receipt in a safe and dry place for 

future reference.

IMPORTANT SAFETY INFORMATION

In this manual, on the labeling, and all other information 

provided with this product:

  This is the safety alert symbol.  It is used to alert you to potential 

personal injury hazards.  Obey all safety messages that follow this 

symbol to avoid possible injury or death.

DANgER indicates a hazardous situation 

which, if not avoided, will result in death or 

serious injury.
WARNINg indicates a hazardous situation 

which, if not avoided, could result in death 

or serious injury.
CAuTION, used with the safety alert 

symbol, indicates a hazardous situation 

which, if not avoided, could result in minor 

or moderate injury.
NOTICE is used to address practices not 

related to personal injury.
CAuTION, without the safety alert symbol, 

is used to address practices not related to 

personal injury.

DANgER

WARNINg

CAuTION

Notice

CAuTION

Summary of Contents for Professional 97053















Reviews: