background image

Page 2

For technical questions, please call 1‑800‑444‑3353.

SKU 68024 

        

SAVE THIS MANUAL

Keep this manual for the safety warnings 

and precautions, assembly, operating, 

inspection, maintenance and cleaning 

procedures.  Write the product’s serial number 

in the back of the manual near the assembly 

diagram (or month and year of purchase if 

product has no number).  Keep this manual 

and the receipt in a safe and dry place for 

future reference.

Safety Alert Symbol and Signal 

Words

In this manual, on the labeling, and 

all other information provided with 

this product:

  This is the safety alert 

symbol.  It is used to alert 

you to potential personal 

injury hazards.  Obey all 

safety messages that follow 

this symbol to avoid possible 

injury or death.

 

DANGER indicates a 

hazardous situation 

which, if not avoided, will result 

in death or serious injury.
 

WARNING indicates a 

hazardous situation 

which, if not avoided, could 

result in death or serious injury.
 

CAUTION, used with 

the safety alert 

symbol, indicates a hazardous 

situation which, if not avoided, 

could result in minor or 

moderate injury.
 

NOTICE is used to 

address practices not 

related to personal injury.

 

CAUTION, without the 

safety alert symbol, is 

used to address practices not 

related to personal injury.

Symbol Definitions

Symbol

Property or statement

PSI

Pounds per square inch of pressure

CFM

Cubic Feet per Minute flow

SCFM

Cubic Feet per Minute flow at  

standard conditions

NPT

National pipe thread, tapered

NPS

National pipe thread, straight

WARNING marking concerning Risk of 

Eye Injury.  Wear ANSI-approved safety 

goggles with side shields.
Warning marking concerning Risk of  

Puncture Injury.  Wear heavy-duty  

work gloves.

Read the manual before set-up  

and/or use.

WARNING marking concerning Risk of 

Hearing Loss.  Wear hearing protection.

WARNING marking concerning Risk 

of Respiratory Injury.  Wear NIOSH-

approved dust mask/respirator.

WARNING marking concerning Risk  

of Explosion.

IMPORTANT SAFETY S

 

INSTRUCTIONS PERTAINING 

TO A RISK OF FIRE, ELECTRIC 

SHOCK, OR INJURY  

TO PERSONS

Important Safety Instructions

Summary of Contents for 68024





















Reviews: