EQUIPMENT
Operation Manual
Loctite
®
Hysol
™
050 Hot Melt Applicator
120 Volt Part No. 98544, 230 Volt Part No. 98546
050-HT Hot Melt Applicator
120 Volt Part No. 98545, 230 Volt Part No. 98547
Page 1: ...EQUIPMENT Operation Manual Loctite Hysol 050 Hot Melt Applicator 120 Volt Part No 98544 230 Volt Part No 98546 Loctite Hysol 050 HT Hot Melt Applicator 120 Volt Part No 98545 230 Volt Part No 98547 ...
Page 2: ...rectly assembled the side stand should pivot 3 Either attach the plastic tool stand by sliding it into the slot at the base of the tool handle or for a more permanent fixture screw the tool stand to a convenient position on your work surface then slide the tool onto this fixed stand 4 Insert a Loctite Hysol hot melt adhesive stick into the rear of the tool Push the stick forward until slight resis...
Page 3: ...ure reliable performance Loctite Hysol hot melt adhesive sticks are non toxic and non flammable REPLACING THE NOZZLE Only replace the nozzle while the tool is still warm Disconnect the tool from the power supply before proceeding and always use protective gloves Remove the rubber safety cover from the nozzle Unscrew the nozzle from the tool using a 13 mm spanner such as that in the plastic tool st...
Page 4: ... be returned freight prepaid in accordance with instructions from Henkel NO WARRANTY IS EXTENDED TO ANY EQUIPMENT WHICH HAS BEEN ALTERED MISUSED NEGLECTED OR DAMAGED BY ACCIDENT OR IF THE SYSTEM USED TO DISPENSE ANY LIQUID MATERIAL OTHER THAN LOCTITE BRAND PRODUCTS EXCEPT FOR THE EXPRESS WARRANTY CONTAINED IN THIS SECTION HENKEL MAKES NO WARRANTY OF ANY KIND WHATSOEVER EXPRESS OR IMPLIED WITH RESP...
