SKU 66435
For technical questions, please call 1-800-444-3353.
Page 17
cal
position. NEVER attempt to cut
pipes or hollow round objects with the
Bandsaw in its vertical position.
Raise the Body Frame (126) to its full
3.
vertical position, making sure it locks
into place by turning the Support
Plate ((31) to the right until it firmly
locks into the Body Frame.
(See Figure S.)
FIGUrE S
BODY
FrAME
(126)
SUppOrT pLATE
(31)
Remove the two Cross Head Screws
4.
(87) from the Lower Blade Guard (9).
(See Figure T.)
FIGUrE T
CrOSS HEAD SCrEWS
(87)
Attach the Vertical Cutting Support
5.
Plate (98) to the Vertical Cutting Plate
(99) using one Cross Head Screw
(87), one Washer (63), and one Hex
Nut (100).
(See Figure U.)
FIGUrE U
VErTICAL
CUTTING
SUppOrT
pLATE
(98)
HEx NUT
(100)
WASHEr
(63)
CrOSS
HEAD
SCrEW
(87)
VErTICAL
CUTTING
pLATE
(99)
Guide the Saw Blade (86) through the
6.
slot in the Vertical Cutting Plate (99),