SKU 66435
For technical questions, please call 1-800-444-3353.
Page 16
retighten the Hex Head Screw.
(See Figure Q.)
LOCK
HANDLE
(38)
HEx HEAD SCrEW
(40)
SCALE
(53)
MOVEABLE
VISE pLATE
(34)
MITErING
VISE pLATE
(36)
FIGUrE Q
Stock Stop Adjustment:
When mounted to the Bandsaw, the
1.
Stock Stop (29) assembly is used
to make repetitive cuts of the same
length.
(See Figure r.)
To adjust the Stock Stop (29), loosen
2.
the Set Screw (130) and adjust it to
the desired length position. Then
retighten the Set Screw.
(See Figure
r.)
WOrKpIECE AND WOrK
ArEA SET Up
Designate a work area that is clean
1.
and well-lit. The work area must not
allow access by children or pets to
prevent injury and distraction.
Route the Power Supply Cord (97)
2.
along a safe route to reach the work
area without creating a tripping hazard
or exposing the Cord to possible dam-
age. The Cord must reach the work
area with enough extra length to allow
free movement while working.
Secure loose work pieces using the
3.
Vise (34, 36) assembly to prevent
movement while working.
There must not be hazardous objects,
4.
such as utility lines or foreign objects,
nearby that will present a hazard while
working.
OpErATING INSTrUCTIONS
read the ENTIrE IMpOrTANT
SAFETY INFOrMATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
Basic Operation - Vertical position:
WArNING!
1.
Do not plug the Power
Supply Cord (97) into a 120 volt,
grounded, electrical outlet until all
necessary adjustments have been
made (as previously discussed in this
manual).
CAUTION!
2.
Cut only
SOLID
workpiec-
es when the Bandsaw is in its
verti-
FIGUrE r
SET
SCrEW
(130)
STOCK
STOp
(29)
STOCK
STOp
rOD
(28)