SKU 66435
For technical questions, please call 1-800-444-3353.
Page 15
Motor Pulley (93). Next, move the
Motor backwards to tighten the ten-
sion on the V-Belt. Then, retighten
the Screw to secure the Motor in
place.
(See Figures M, N, and O.)
WArNING!
3.
Always securely close
the Upper Pulley Cover (92) after ad-
justing the cutting speed or replacing
the V-Belt (128).
(See Figure N.)
FIGUrE M
SCrEW
(102)
MOTOr
(94)
FIGUrE N
UppEr pULLEY COVEr
(92)
V-BELT
(128)
MOTOr
pULLEY
(93)
WOrM
GEAr
pULLEY
(115)
FIGUrE O
WOrM GEAr pULLEY
(115)
MOTOr pULLEY
(93)
Feed rate Adjustment:
The feed rate of the Blade can be
1.
adjusted by turning the Adjusting Rod
(58) clockwise to decrease the feed
rate or counterclockwise to increase
the feed rate.
Do not turn the Adjusting Rod more
2.
than one turn at a time. Excessive
feed pressure can break the Saw
Blade (86). Insufficient feed pressure
dulls the Saw Blade rapidly.
(See Figure p.)
FIGUrE p
ADjUSTING rOD
(58)
Vise Angle Cut Adjustment:
Loosen the Lock Handle (38), and
1.
move the Mitering Vise Plate (36) to
the desired angle as indicated by the
Angle Scale (53). Then retighten the
Lock Handle.
(See Figure Q, next page.
Loosen the Hex Head Screw (40), and
2.
adjust the Moveable Vise Plate (34) to
parallel the Mitering Vise Plate. Then