Page 11
SKU 45656
For technical questions, please call 1-800-444-3353.
To Mount The Tire Onto The Wheel Rim:
1.
WARNING:
Before carrying out this procedure, deflate the tire fully, and remove
all the wheel weights.
2.
Spread tire grease (or a similar lubricant) liberally on the complete circumference
of the tire bead to avoid damage to the tire and to facilitate the mounting
procedure.
3.
Lock the wheel rim, using the inner part of the Jaws (17C).
(See Figure E.)
4.
NOTE: When you are working with wheel rims of the same size, it is not always
necessary to lock and unlock the Tools Shaft (13A). Instead, move the Swinging
Arm (5A) sideways with the Tools Shaft locked.
(See Figure E.)
5.
TOOLS SHAFT
(#13A)
MOUNTING
HEAD (#15A)
FIGURE J
Move the tire so that the bead passes below the front section of the Mounting
Head (15A) and is brought up against the edge of the rear section of the
Mounting Head.
(See Figure J.)
6.
Keep the tire bead pressed down into the wheel rim channel with your hands.
Then, depress the Reverse Pedal (59E) to rotate the Turntable
(1C)
clockwise
. Continue this process throughout the entire circumference of the
wheel and tire.
(See Figures B and E.)
7.
Insert the inner tube (if there is one).
